Application of laser marking machine with end pump laser source :
Spray Material, Plastic etc.
Features of end-pump laser source
1:The light conversion efficiency is high, the output laser spot is small, the beam quality is good, (M<1.2), the output laser stability is high, the marking effect is easier to debug, the marking line is finer, and it is more suitable for some fine graphic marks. The performance of the whole machine is stable, the air cooling avoids the water tank, the volume is small, and the power consumption is low;
2:The LD can last for tens of thousands of hours under continuous working conditions, and the number of pulses can reach 10 times in the pulse working state. In contrast, the life of the flash lamp in pulse and continuous operation is only 10 times and 2000 hours respectively;
3:The instability of LD-pumped solid-state lasers can usually be kept below one percent;
4:The product uses end-pumping of semiconductor components. It is based on the latest generation of laser technology and has created a number of proprietary technologies,The new cavity technology used reduces the thermal lens effect, ensures the fundamental mode output of the laser, and increases The stability of the light output;
5:The laser has the characteristics of good beam quality, high peak power, reliable performance, compact structure, convenient adjustment, low cost, simple operation and maintenance, etc,especially suitable for laser micro machining,
Laser marking, laser cutting and other industrial manufacturing fields.
Marking samples of end-pump laser marking machine
